Indications That Your Lot Needs Parking Lot Striping

Maintaining the functionality of your parking lot is essential to keep your business going. After all, this open space is usually the first area that customers go into whenever they visit your store or office. Of course, making a good impression is necessary to attract customers. But keeping your parking space safe and accessible is also empirical to boost business integrity.

So we invite you to continue reading as we’re going to talk about the indications that your lot needs parking lot striping.

Signs That Your Parking Space Needs Striping

How long does asphalt paving last? Usually about 5 to 10 years. But the paint on the surface would fade sooner.

If you notice your parking lot has a dull appearance and the markings have all been worn out due to harsh weather, constant vehicle traffic, and excess salting, then these are clear indications that you have to consider a striping project. To be specific, if the markings are no longer visible and are 75% faded from their original appearance and are littered with dirt, it’s recommended to have your lot repainted ASAP so it will be navigable to vehicles and pedestrians alike.

Asphalt striping projects are usually handled by capable contractors like A-Rock Asphalt in Utah to ensure quality results.

Types Of Striping Process You Can Do To Your Parking Lot

There are a few different types of parking lot striping. The most common type is called crosswalk striping. This type of striping is used to indicate where drivers should stop whenever they are approaching a crosswalk. The stripes are usually painted in a bright color so that they are easy to see.

The next type of striping is called turning lane striping. And it is used to indicate drivers where they should enter or leave the parking lot to maintain a continuous flow of traffic, which is painted in different colors than the other markings in the parking lot.

Another type of striping is called lane striping. And this is used to direct drivers where they should drive inside the parking area. The stripes are usually painted in a different color than the crosswalk stripes so they will be visible to drivers even at a distance.

The last type of striping is the parking space striping, and it is used to direct drivers to the designated parking areas inside the lot.

Steps Involved In Striping A Parking Lot

1. Cleaning the parking area to prepare it for the painting process.
2. Choose the right paint.
3. Contractors will measure and mark off the lines.
4. Painting the lines.
5. Letting the paint dry.
6. Add additional markings as needed.

When choosing the right paint, you need to decide what color you want the stripes to be. The most common colors are white and yellow, but you can choose any color you want. Then, you need to decide on the kind of paint to be used, the most common of which are water-based and oil-based paints.

Once the right paints are selected, the contractor will need to measure and mark off the lines with tape measure and chalk. They’ll usually start off by measuring the width of the parking lot and mark off where you want the lines to be.

After marking the lines, the contractor will start painting from the center lines to the edges of the lot. Then, the painted areas are left to dry for several minutes to an hour at most.

If you want to add additional markings, the contractor will then use a different type of paint. Just make sure the paint you have selected is compatible with the type of paint used for the stripes.

When the striping process is done, the contractor will again clean up the lot and remove any messes made during the painting to ensure the lot is looking neat and tidy before opening it for your customers for parking.